A few local spots
Written scope requiredThe subfloor and installed method need a written scope.
Laminate cost estimate
Prices checked August 17, 2026Start with the floor area and what you know about the subfloor. We’ll calculate the carton count, installation budget, and leveling allowance.
Floor area
Area is enough for a first estimate. Exact dimensions improve perimeter and trim quantities.
Enter your measured wall-to-wall dimensions.
Public product prices feed the carton calculation. Labor and floor preparation use dated public rates where available. The research includes no complete written contractor quote.
Floor preparation
These scenarios help set a budget. A straightedge map, moisture test, and exposed-floor inspection determine the actual method.
The subfloor and installed method need a written scope.
The subfloor and installed method need a written scope.
The subfloor and installed method need a written scope.
Provisional reference. Structural confirmation and a written installation method are required; this amount is never added automatically.
Selected-product manuals require about 3/16 in maximum unevenness over 10 ft. A sloped floor may still be flat; a level-looking floor can still contain failing dips.
Cost breakdown
The headline is rounded for readability. Components retain calculation precision.
One fewer carton would miss the selected waste target by only 0.2 sq ft. Confirm the return policy before ordering.
Checked products
Each card uses a real dated listing. Stock, lot, checkout price, and the current installation manual still need confirmation.
AC3 · 8 mm · 24-hour water resistant
AC4 · 8 mm core + 2 mm attached pad · Water resistant
AC4 · 12 mm · Waterproof surface claim; not permission to install over an active moisture condition
Check a written quote
Enter the amount you would pay and confirm every required line. Price placement waits while leveling remains unchecked.
This draft stays in this browser.
Then confirm the written scope.
Request quotes
These are real public contact routes checked during research. Inclusion does not verify availability, price, insurance, licensing, or workmanship.
Ready to send“Please quote one laminate room: 267.9 sq ft; please confirm exact dimensions. Current floor: carpet. Product: Pergo XP Anndel Oak; 16 cartons. After removal, measure the room, flatness, and moisture; itemize any preparation by area and depth; and include the approved underlay/moisture system, installation, trim, transitions, delivery, disposal, tax, exclusions, and change-order cap.”
Sources
Source notes stay in their original language. Product prices are checked and dated; estimated additions are identified clearly.
SF-LAM-C-PROJECT-ROOMRecorded source note · original language19 ft × 14.1 ft = 267.9 sq ft · 66.2 linear ft perimeter · 10% default straight-layout cut allowance
SF-LAM-B-LOWES-PRACTICALRecorded source note · original language$31.67 per carton · $1.49 per sq ft display price · 21.26 sq ft per carton · 8 mm, AC3, no attached underlayment
SF-LAM-B-HD-PERGO-XPRecorded source note · original language$39.06 per carton · $1.99 per sq ft display price · 19.63 sq ft per carton
SF-LAM-B-PERGO-XP-SPECRecorded source note · original languageModel LF001075 · AC4 · 8 mm core plus 2 mm attached pad · Water-resistant product positioning
SF-LAM-B-HD-PERGO-OUTLASTRecorded source note · original language$52.80 per carton · $2.69 per sq ft display price · 19.63 sq ft per carton · 12 mm, AC4, attached pad, waterproof surface claim
SF-LAM-B-PERGO-INSTALLRecorded source note · original language3/16 in maximum unevenness over 10 ft · 6 mil vapor barrier over concrete · Clean, dry, secure substrate · Product-specific moisture testing limits · Floor drain and sump exclusions
SF-LAM-B-LOWES-INSTALL-GUIDERecorded source note · original language3/16 in flatness limit over 10 ft · 6 mil virgin polyethylene over concrete · No vapor barrier over wood · One laminate-appropriate underlayment layer for no-pad plank
SF-LAM-B-HD-UNDERLAY-SERENITYRecorded source note · original language$30.99 per 100 sq ft roll
Record the worst straightedge gap, affected area, and average correction depth.
Use the test and limits required by the exact product manual.
Confirm underlay, vapor control, acoustic rules, expansion gaps, and finished height together.
Avoid open-ended phrases such as “leveling extra.” Require a method, allowance, and approval rule.